K-I-S-S-I-N-G

February 18, 2019

I know that Valentine's Day is past, but I want to share the card that I made for my sweetheart!

I chose this darling image of a couple in a "romantic" gesture. It came from Apex Cuttable Designs. First I cut out the image from red card stock. I knew that I wanted to use just the outline of the image. However, this could prove confusing for the finished piece. Thus I used my Pazzles software to erase all the cut line of the image except for the "holes" between the two figures.

The Spaces Between Figures

I cut the black cardstock that "housed" the spaces to be just smaller than the finished card size. When I cut the image from red card stock I cut that slightly bigger than the black piece.

K-I-S-S-I-N-G

Next I added foam to the reverse of the red cut to raise the entire image.

Dimensional Foam

I carefully aligned the two pieces together. Adding the card front to a white base was the final pop it needed. I added a 3-dimensional umbrella. I designed this in Pazzles. It turned out perfectly!

True Love

And in case you were wondering . . . Here's a peak underneath the umbrella!

K-I-S-S-I-N-G

Leave a Reply Cancel reply